Part Number Hot Search : 
RU8048S F4007 2R420S PD166 RU8048S C6707 A6044LP W1T1G
Product Description
Full Text Search
 

To Download LMS350GF04 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  doc . no vms350gf01 rev.no 000 page 1 /35 to : ( ? ) ??? date : june. 21. 2007 vodatech tft-lcd model no. : vms350gf04 preliminary customer approval approvedby: r&d center division voda tech. co. ltd.
doc . no vms350gf01 rev.no 000 page 2 /35 data rev. no. page summary 2007.06.21 000 - - preliminary revision history
doc . no vms350gf01 rev.no 000 page 3 /35 contents genneral discription 1. absolute maximum ratings -------------- ---------- (6) 1.1 absolute ratings of environment 1.2 electrical absolute ratings 2. optical characteristics -------------- -------- (8) 3. electrical characteristics --------------------- (12) 3.1 tft-lcd module 3.2 back-light unit 4. block diagram ------------------------ (14) 4.1 tft-lcd module (interface system structure) with back light unit. 5. input terminal pin assignment ------------------------ (15) 5.1 input signal & power 5.2 input signal,basic display colors and gray scale of each colors 6. operation specifications -------------- ---------- (18) 6.1 serial peripheral interface 6.2 data format for 24bit rgb interface 6.3 24bit rgb interface timing 6.4 electrical specifications 7. command list & instruction descriptions ----------------------- (22) 7.1 command list 7.2 instruction descriptions 8. power on/off sequence ------------------------- (23) 8.1 power on sequence 8.2 power off sequence 8.3 stanby mode sequence 9. outline dimension ------------------------ (25)
doc . no vms350gf01 rev.no 000 page 4 /35 10. packing -------------------------- (26) 11. marking & others ---------------- ---------- (27) 12. reliability test result --------------------------- (28) 12.1 condition 12.2 judgement 13. quality specifications -------------------------- (30) 13.1 acceptable quality level 13.2 inspection condition 13.3 definition of inspection zone in lcd 13.4 inspection method 13.5 incoming inspection standard 14. general precautions -------------------- ------- (34) 14.1 handling 14.2 operation 14.3 storage
doc . no vms350gf01 rev.no 000 page 5 /35 general description * description vms350gf01 is a tm (transmissive) type color active matrix tft (thin film transistor) liquid crystal display(lcd) that uses amorphous silicon tft as a switching devices. this model is composed of a tft(thin film tr ansistor) lcd(liqui dcrystaldisplay) module, driver circuit , back-light unit. the resolution of a 3.5" contains 320(h) x rgb x 240(v) pixels and can display up to 16m colors. * features - tm (transmissive) type and back-light with 6 led's are available. - tn(twist nematic) mode. - line inversion mode with stripe type. - 24bit rgb interface + serial peripheral interface(spi) - gate driver ic embeded on panel(dual asg) - low power consumption. * applications - display terminals for p-cns(portable car navigation system), dsc(digital still camera), pmp(portable multimedia player), voip(voice over internet protocol) phone application products. * general information items specification unit note display area 70.08(h) x 52.56(v) mm - driver element a-si tft active matrix - - display colors 16.7m colors - number of pixels 320rgb(h) x 240(v) dot - pixel arrangement stripe type - - pixel pitch 0.219(h) x 0.219(v) mm - display mode normally white - - viewing direction 6 o'clock - * mechanical information item min. typ. max. unit note module size horizontal(h) 76.3 76.5 76.7 mm - vertical(v) 63.3 63.5 63.7 mm (1) depth(d) 2.98 3.13 3.28 mm (1) weight - 43 48 g - note (1) not include fpc. refer to the outline dimension in the "9.outline dimension" for further information.
doc . no vms350gf01 rev.no 000 page 6 /35 1. absolute maximum ratings 1.1 environment item min max remark storage temperature -30 80 note(1) operating temperature -20 70 note(2)(3) note(1) 90%rh maximum humidity, 60 maximum wet-bulb temperature (2) when operated at a temperature lower than 0, the lcd worked slowly and the screen appeared low-contrast images due to the characteristics of lc(liquid crystal). (3) if any fixed pattern is displayed on lcd for minutes, image-sticking phenomenon may occur. temperature & humidity graph at absolute environment
doc . no vms350gf01 rev.no 000 page 7 /35 1.2 electrical absolute ratings (1) tft-lcd module characteristics symbol min. max. unit note power supply voltage v cc -0.5 3.6 v - i/o power supply voltage vci -0.5 3.6 v - input voltage vi -0.5 vci + 0.5 v - input current ii 10 ma - (2) back-light unit (ta = 25 2c) item symbol min. max. unit. note current i b 25 ma (1) note (1) permanent damage to the device may occur if maximum values are exceeded or reverse voltage is loaded. functional operation should be restricte d to the conditions described under normal operating conditions.
doc . no vms350gf01 rev.no 000 page 8 /35 2. optical characteristics the following items are measured under stable conditions. the optical characteristics should be measured in a dark room or equivalent state with the methods shown in note (1). measuring equipment: lcd-5000, bm-5a, bm-7, pr-650, ez-contrast (temp = 25 2c, vdd = 2.8v, i b = 18ma) item symbol condition min. typ. max. unit note contrast ratio (center point) c/r note (1) =0 =0 normal viewing angle b/l on 150 250 - - (2) bm-5a luminance of white (center point) y l 210 250 - cd/ O (3) bm-5a uniformity - 80 - - % (4) bm-7 response time rising:tr tr+tf - 50 70 msec (5) bm-7 falling:tf color chromaticity (cie 1931) white wx tbd tbd tbd - (6) pr-650 wy tbd tbd tbd red rx tbd tbd tbd ry tbd tbd tbd green gx tbd tbd tbd gy tbd tbd tbd blue bx tbd tbd tbd by tbd tbd tbd viewing angle hor. l c/r 10 b/l on -60- degrees (7) ez-contrast r - 60 - ver. h - 50 - l - 55 -
doc . no vms350gf01 rev.no 000 page 9 /35 note (1) test equipment setup after stabilizing and leaving the panel alone at a given temperature for 30 min , the measurement should be executed. measurement should be executed in a stable, windless, and dark room. 30 min after lighting the back-light. this should be measured in the center of screen. environment condition : temp = 25 2 c back-light on condition the center of the screen photodetector photodetector field bm-5a 1 bm-7 1 pr-650 1 lcd panel tft - lcd module bm-5a : 40 M bm-7 : 50 M pr-650: 50 M field back-light off condition photodetector photodetector field lcd-5000 1 lcd panel tft - lcd module the center of the screen lcd-5000 : 50 M optical measuring equipment setup 30 light source : halogan lamp or d65 incident light reflected light
doc . no vms350gf01 rev.no 000 page 10 /35 note (2) definition of contrast ratio (c/r) : ratio of gray max (gmax) & gray min (gmin) at the center point cr g g = max min * gmax : luminance with all pixels white * gmin : luminance with all pixels black note (3) definition of luminance of white : luminance of white at the center point note (4) definition of brightness uniformaity measure 9 point ( p0~p8 ) and define the brightness uniformity using brightness uniformity = x 100 minimum brightness among p0~p8 maximum brightness among p0~p8
doc . no vms350gf01 rev.no 000 page 11 /35 note (5) definition of response time : sum of tr ,tf display data black(tft on) white(tft off) white(tft off) optical response 100% 90% 10% 0% t r t f time note (6) definition of color chromaticity (cie 1931) color coordinate of white & red, green, blue at center point. note (7) definition of viewing angle : viewing angle range (cr 10 ) 6 o?clock direction normal line l r h l 12 o?clock direction r =90 o l =90 o = 0 o , x x' y' y = 0 o h = 90 o l = 90 o
doc . no vms350gf01 rev.no 000 page 12 /35 3. electrical characteristics 3.1 tft-lcd module ta = 25 2c characteristics symbol min. typ. max. unit note power supply voltage v cc 3.0 3.3 3.6 v - io power supply voltage vci 3.0 3.3 3.6 v - power dissipation black p tbd tbd tbd mw (1),(2) white p full tbd tbd tbd current dissipation black i tbd tbd tbd ma white i full tbd tbd tbd frame frequency f frame tbd tbd tbd hz - dot clock dotclk tbd tbd tbd mhz - serial clock scl tbd tbd tbd mhz - note (1) v cc = 3.3v, f frame = tbd hz, dotclk = tbd mhz (2) dissipation current check pattern ? 255 gray white pattern ? 0 gray black pattern
doc . no vms350gf01 rev.no 000 page 13 /35 3.2 back-light unit the back-light system is an edge-lighting type with three white led(light emitting diode)s. (ta = 25 2c) item symbol min. typ. max. unit note current i b - 20 ma (1),(3) power consumption p bl - 400 mw (2) note (1) six leds serial type. (2) where i b = 20ma, v b =p bl /i b (3) ambient temperature vs. allowable forward current.
doc . no vms350gf01 rev.no 000 page 14 /35 4. block diagram 4.1 tft-lcd module (interface syste m structure) with back light unit. j ? ? ? ? ? ? ? ? ? g ? ? ? ? g o ? ? ? cs data[23:0] scl sdi reset led_anode led_cathode vcc (2.5v~3.3v) z ? ? ? ? ? g k ? ? ? ? ? { ? ? ? ? ? g j ? ? ? ? ? ? ? ? ? vcom, vgh, vgl generation circuit lcd data out[960] y1 y960 ???????.. g2 ???????.. g240 g4 g1 ???????.. g239 g3 3.5 ? tft lcd panel 1 chip dotclk gnd vsync] hsync de j ? ? ? ? ? ? ? ? ? g ? ? ? ? g o ? ? ? cs data[23:0] scl sdi reset led_anode led_cathode vcc (2.5v~3.3v) z ? ? ? ? ? g k ? ? ? ? ? z ? ? ? ? ? g k ? ? ? ? ? { ? ? ? ? ? g j ? ? ? ? ? ? ? ? ? { ? ? ? ? ? g j ? ? ? ? ? ? ? ? ? vcom, vgh, vgl generation circuit lcd data out[960] y1 y960 ???????.. g2 ???????.. g240 g4 g1 ???????.. g239 g3 3.5 ? tft lcd panel 1 chip dotclk gnd vsync] hsync de
doc . no vms350gf01 rev.no 000 page 15 /35 5. input terminal pin assignment 5.1 input signal & power (connector : fh28-54s-0.5sh) pin no pin name discription pin no pin name discription 1 led_cathode led cathod pin 30 data18 bi-drectional data port 2 led_cathode led cathod pin 31 data19 3 led_anode led anode pin 32 data20 4 led_anode led anode pin 33 data21 5 c6 no connection 34 data22 6 c5 no connection 35 data23 7 m no connection 36 hsync horizental sync signal 8 reset system reset 37 vsync vertical sync signal 9 cs chip selet 38 dotclk rgb interface dot clock 10 scl serial clock signal 39 vci analog system input signal 11 sdi serial data signal 40 vci analog system input signal 12 data0(r0_lsb) bi-drectional data port 41 vdd system input signal 13 data1 42 vdd system input signal 14 data2 43 c4 no connection 15 data3 44 vgl no connection 16 data4 45 vgl no connection 17 data5 46 c3 no connection 18 data6 47 vgh no connection 19 data7 48 c2 no connection 20 data8(g0_lsb) 49 c1 no connection 21 data9 50 vcom no connection 22 data10 51 vcom no connection 23 data11 52 enable data enable signal 24 data12 53 gnd ground 25 data13 54 gnd ground 26 data14 27 data15 28 data16(b0_lsb) 29 data17
doc . no vms350gf01 rev.no 000 page 16 /35 5.2 input signal,basic display colors and gray scale of each colors color display data signal gray scale level red green blue r0 r1 r2 r3 r4 r5 r6 r7 g0 g1 g2 g3 g4 g5 g6 g7 b0 b1 b2 b3 b4 b5 b6 b7 basic color black 000000000000000000000000 - blue 000000000000000011111111 - green 000000001111111100000000 - cyan 000000001111111111111111 - red 111111110000000000000000 - magenta111111110000000011111111 - yellow 111111111111111100000000 - white 111111111111111111111111 - gray scale of red black 000000000000000000000000 r0 dark light 100000000000000000000000 r1 010000000000000000000000 r2 :::::::::::::::::::::::: r3~r252 :::::::::::::::::::::::: 101111110000000000000000 r253 011111110000000000000000 r254 red 111111110000000000000000 r255 gray scale of green black 000000000000000000000000 g0 dark light 000000001000000000000000 g1 000000000100000000000000 g2 : :::::: :::::: ::::: g3~g252 : :::::: :::::: ::::: 000000001011111100000000 g253 000000000111111100000000 g254 green 000000001111111100000000 g255 gray scale of blue black 000000000000000000000000 b0 dark light 000000001000000000000000 b1 000000000100000000000000 b2 : :::::: :::::: ::::: b3~b252 : :::::: :::::: ::::: 000000001011111100000000 b253 000000000111111100000000 b254 blue 000000001111111100000000 b255 note) definition of gray : rn : red gray, gn : green gray, bn : blue gray (n = gray level) input signal : 0 = low level voltage, 1 = high level voltage 6. operation specifications
doc . no vms350gf01 rev.no 000 page 17 /35 6.1 serial peripheral interface 6.2 data format for 24bit rgb interface input rgb assignment d23 d22 d21 d20 d19 d18 d17 d16 d15 d14 d13 d12 d11 d10 d9 d8 d7 d6 d5 d4 d3 d2 d1 d0 output r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 s(3n+1) s(3n+2) s(3n+3)
doc . no vms350gf01 rev.no 000 page 18 /35 6.3 24bit rgb interface timing dotclk = f frame (240 + vbp + vfp) (320 + hbp + hfp) =60hz(240+vbp+vfp)(320+hbp+hfp) * hbp : 8 ~ 511 clk, vbp : 1~255h *hlw 3clk, vlw 1h 1 period(1frame) vfp vbp 240h vlw vsync hsync 1h vlw 3clk hlw hsync dotclk hfp hbp enable data[23:0] 320 319 318 3 2 1 valid data transfer area
doc . no vms350gf01 rev.no 000 page 19 /35 6.4 electrical specifications (when vccio: 2.5 ~ 3.3v ) a. rgb data interface characteristics (t a =-40to+85) characteristic symbol 24bit rgb interface unit min max dotclk cycle time tdcyc 50 - ns dotclk rise/fall time tr,tf - 2 dotclk pulse width high tdchw 20 - dotclk pulse width low tdclw 20 - enable setup time tens 15 - enable hold time tenh 15 - pd data setup time tpds 15 - pd data hold time tpdh 10 -
doc . no vms350gf01 rev.no 000 page 20 /35 b. ac characteristics c. reset timing characteristics (t a =-40to+85) characteristic symbol min max unit reset low pulse width tres 10 - us note. reset low pulse width shorter than 1us do not make reset. it means undesired short pulse such as glitch, bouncing noise or electorstatic discharge do not cause irregular system reset. please refer to the table below.
doc . no vms350gf01 rev.no 000 page 21 /35 c. dc characteristics 7. command list & instruction descriptions 7.1 command list refer to the appendix 1: driver ic specification 7.2 instruction descriptions refer to the appendix 1: driver ic specification
doc . no vms350gf01 rev.no 000 page 22 /35 8. power on/off sequence 8.1 power on sequence
doc . no vms350gf01 rev.no 000 page 23 /35 8.2 power off sequence
doc . no vms350gf01 rev.no 000 page 24 /35 9. outline dimension - next page shown

doc . no vms350gf01 rev.no 000 page 26 /35 10. packing tbd
doc . no vms350gf01 rev.no 000 page 27 /35 11. marking & others refer to additional drawing no fixed (decision after negotiation )
doc . no vms350gf01 rev.no 000 page 28 /35 12. reliability test result 12.1 condition item condition sample size test result note high temperature operating life test 60, 240hr 10ea pass low temperature operating life test -20, 240hr 5ea pass thermal humidity bias test 50, 90rh, 240hr 10ea pass temperature cycle on/off test -30 ? 70 on/off, 12cy 5ea pass (1) high temperature storage test 70, 240hr 5ea pass low temperature storage test 30, 240hr 5ea pass wet high temperature storage test 60, 90rh, 240hr 10ea pass thermal shock test (storage) -30 ? 70, 100cy 10ea pass (2) low air pressure storage test 188mbar, 72hr 5ea pass esd contact shield 4? nude 8?, 150?/330? 5ea pass (3) air shield 8? nude 15?, 150?/330? 5ea pass (3) pad 2?, 100?/1500? 5ea pass (3) case vibration test random vibration mil-std 810e, y axis 1box pass (4) box drop test 1 color 3 edges 6 faces, 9.2~18.2K 66M 1box pass
doc . no vms350gf01 rev.no 000 page 29 /35 note (1) on time over 10 secinds, off time under 10 seconds 70 -20 -30 30min 30min 30min 30min 30min 90min 10min 10min 10min 60 30min 10min -10 0 ?? 25min temperature 1cycle time(hr) 2~4hr note (2) storage temperature 2hr ?? 1~2min 2~4min 2hr 1~2min 1cycle time(hr) 2~4hr note (3) main lcd, 5 times to every 4 corners of active area note (4) basic transportation by common carrier environmental, 514.4 min-std-810e 12.2 judgement - main lcd should work under the normal condition - during the temperature and humidity test, the luminance and c/r(contrast ratio) should not be changed over 50% compared with those before the test.
doc . no vms350gf01 rev.no 000 page 30 /35 13. quality specifications
doc . no vms350gf01 rev.no 000 page 31 /35
doc . no vms350gf01 rev.no 000 page 32 /35
doc . no vms350gf01 rev.no 000 page 33 /35
doc . no vms350gf01 rev.no 000 page 34 /35 14. general precautions 14-1. handling assembled, lcd module should be firmly attached to the set. do not bent or twist. refrain from strong mechanical shock and forces to the module. it may cause improper operating or damage to the module. do not touch, press or rub the display panel with hard or stiff tools or subjects. the polarizer is easily damaged. wipe off water or oil drop immediately if you leave drop for a long time, stain and discoloration may occur. when cleaning the surface of polarizer, use soft cloth with solvent like isopropyl or ethyl alchol or hexane. do not use water, ketone, acetone, ethyl alchol, toluene, ethyl acid, methyl chloride. be care full of applying hcfc, chlorine(cl), salfur(s), spittle, fingerprint to ito pattern these may cause ito corrosion. when handling the lcd module, put on a soft glover like finger-glover. protection film on the polarizer shall be slowly peeled off just before use, so that the electrostatic charge can be minimized. do not touch pads or pins of interface directly with bare hands. protect the module from static electricity, it may cause damage to cmos lsi. if the liquid crystal leaks from the panel it should be kept away from the eyes and mouths. in case of contact with skins, wash away thoroughly with soap and water. 14-2. operation do not input any signals before power is turned on. do not connect or disconnect the module on the state of power-on. power supply should be turned on or off according to power on/off sequence. supply voltage within the specified voltage limit, the maximum rating, higher voltage cause the shorter lcd life or damaged. avoid condensation of water, it may cause improper operation or disconnection of electrode. do not leave lcd module in direct sunlight and strong ultraviolet ray for many hours. at that time the liquid crystal shall be deteriorated by ultraviolet.
doc . no vms350gf01 rev.no 000 page 35 /35 14-3. storage do not leave the module in high temperature and humidity for a long time. it is recommended to store the module in the place with temperature from 0to35 and relative humidity of less than 70%. do not store the lcd module in the direct sunlight. store the module in a dark place without sunlight and fluorescent. avoid intensive shock and falls from a height.


▲Up To Search▲   

 
Price & Availability of LMS350GF04

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X